Filter
Top Products
4-39
------------------------------+ ----- ------ ----- ----- ------- ----- -----+---------------------------------
Set Single Point Alarm Linkage| FA 7A-7D . . pp . cs | pp=1-192 (position)
Clr Single Point Alarm Linkage| FA 7E-81 . . AA . cs |
Cruise Alarm Linkage Set | FA 82-85 . . group . cs | group=1-16
Cruise Alarm Linkage Cancel | FA 86-89 . . AA . cs |
------------------------------+ ----- ------ ----- ----- ------- ----- -----+---------------------------------
set preset position parameter | FA A0 . . pp . cs | pp=1-192 (position)
speed to preset position | FA A1 . . speed . cs | speed=1-EFh
Dwell time at preset position | FA A2 . . dwell . cs | dwell=1-EFh (seconds)
Set PresetPosition Param Close| FA A3 . . AA . cs |
------------------------------+ ----- ------ ----- ----- ------- ----- -----+---------------------------------
Home Position Set | FA A4 . . AA . cs |
Wait time at Home Position | FA A5 . . WaitT . cs | WaitT=0-EFh (minutes)
Enable Home position On/Close | FA A6 . . on-off . cs | on-off=0/1 (0=off, 1=on)
------------------------------+ ----- ------ ----- ----- ------- ----- -----+---------------------------------
Clear Preset Position | FA A7 . . pp . cs | pp=1-192 (position)
==============================+====== ====== ===== ===== ======= ===== =====+=================================
Speed Dome Setup Menu | FA 90 . . operate . cs | operate=01 Enter menu mode
| | =02 Exit menu mode
| | =03 menu cursor up
| | =04 menu cursor down
| | =05 menu cursor left
| | =06 menu cursor right
| | =07 select option
| | =08 confirm
==============================================================================================================
2-2. Part-II ( Enhance part )
================================================================================================================
| (B1) (B2) (B3) (B4) (B5) (B6) (B7) (B8) |
FUNCTION | CMD1 CMD2 IDH IDL DATA1 KB-ID DATA2 CSUM | DESCRIPTION
------------------------------+------ ----- ----- ----- ------ ----- ----- -----+---------------------------
enhance move | FC OP . . x-spd . y-spd cs | OP: (0-3)
| | bit0: (0=right, 1=left)
| | bit1: (0=up, 1=down)
| |
| | x-spd=0-EFh
| | y-spd=0-EFh