Filter
Top Products
CHAPTER 3 OSD MENU AND CONFIGURATION
33
3.3.8.3 SYNC
There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-
LOCK. In LINE-LOCK mode, without a synchronous generator, it synchronizes the
video signal between cameras. The Line-Lock synchronization is only used in the places of
60Hz (NTSC models) or 50Hz (PAL models).
-INT: Internal synchronization
-LL: External line-lock synchronization
=> If you choose “LL”, you can adjust the phase your wish to set. Then press the mini-
joystick. You can adjust the phase you wish to set from 0 to 359.
3.3.8.4 MOTION DETECTION
EZ550 enables you to observe movements of objects in 4 different places on the screen,
the message “MOTION DETECTED” appears on the screen when movement is
detected; therefore this helps to improve supervision efficiency. The camera detects an
object’s movement by sensing discrepancy of outline.
1) Please direct the arrow to point to “MOTION DET” by turning the mini-joystick UP
(c) or DOWN (d).
2) Select “ON” by turning the mini-joystick LEFT (e) or RIGHT (f).
3) Press the mini-joystick.
z Please select the area you would like to detect from the 4 areas in AREA SEL
mode.
z Please select ON mode for the chosen area.
z Please turn mini-joystick UP (c) or DOWN (d) to move between TOP,
DOWN, LEFT and RIGHT for adjusting the size of the area.
z Please turn mini-joystick LEFT (e) or RIGHT (f) to adjust the value for size of
the area.
MOTION DETECTION
> AEREA SEL AREA1
AREA STATE ON
TOP |+++++++++| 10
DOWN |+++++++++| 25
LEFT |+++++++++| 20
RIGHT |+++++++++| 40
Press SET to return
SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
> SYNC. LL <┘
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
SYNC. INT
> MOTIION DET ON <┘
PRIVACY OFF
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
SYNC
> PHASE |++++++++| 0