Filter
Top Products
CHAPTER 3 OSD MENU AND CONFIGURATION
36
z Please turn the mini-joystick LEFT (e) or RIGHT (f) to adjust the value for size
of the area to be covered.
z Additionally, it is possible to change the position of the area to be covered.
Please refer to the following example for detailed steps on moving AREA1 to
center.
1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT:
40.
2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10,
DOWN: 45, LEFT: 20 and RIGHT: 40.
3. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN:
45, LEFT: 20 and RIGHT: 40.
AREA1
AREA2
AREA3 AREA4
AREA1
AREA1
AREA1