Filter
Top Products
CHAPTER 3 OSD MENU AND CONFIGURATION
34
z Additionally, it is possible to change the position of the area. Please refer to the
following example for detailed steps on moving AREA1 to center.
1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT:
40.
2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10,
DOWN: 45, LEFT: 20 and RIGHT: 40.
3. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN:
45, LEFT: 20 and RIGHT: 40.
AREA1 AREA2
AREA3 AREA4
AREA1
AREA1
AREA1