Fisher VPC-C4GX Camcorder User Manual


 
English 132
CHECKING THE REMAINING CARD MEMORY
You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see “Possible No. of
Images/Possible Shooting Time/Possible Recording Time” on page 178.
Checking the remaining number of images and video recording time
1 Set the main switch to REC, and
turn on the camera (page 40).
h The remaining number of images
appears in the upper left of the LCD
monitor.
h The remaining video recording time
appears in the upper right of the
LCD monitor.
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is “0”, you cannot
capture any more images. To
capture more images, either install
a new card, or save the images to a
computer and then erase them
(page 92) from the card.
h When the remaining number of
images or the remaining video
recording time is “0”, it may be
possible to capture a few more
images by setting a lower resolution
setting (page 67), or selecting a
different image quality setting.
12 00:00:15
Remaining number of images
Remaining video
recording time