Fisher VPC-C4GX Camcorder User Manual


 
37 English
INSTALLING THE BATTERY PACK AND CARD
The card can be used after it has been formatted with the camera (page 129).
Make sure that the battery pack polarity (+ and –) and the card orientation are
correct.
Install the battery pack
1 Open the battery cover on the side.
h Open the battery cover by lightly
pressing it and sliding it towards the
rear.
2 Insert the battery pack.
h Firmly push it all the way in.
h Match the [I] mark on the battery
pack with the [I] mark on the
camera.
<To remove the battery pack...>
h Raise the battery pack and pull it
out.