Filter
Top Products
Turning the Power Off
1 Set the main switch to “MONITOR OFF” or “CAMERA.”
2 Close the lens cover.
œ The power turns off.
œ The stand-by indicator turns off.
œ If the main switch was set to “CAMERA,” the LCD
monitor turns off.
Turning the Power On when the Power Save
Function is Active
In order to save the battery power, the power save function will automatically turn off the power
after one minute of no use in the camera mode, or five minutes of no use in the image playback
mode.
To restore power for capturing images
1 Close and open the lens cover, or press the shutter
release button once.
To restore power for viewing images
1 Close and open the lens cover, or set the main switch
to another position, then back to “PLAY.”
NOTE
œ When using the AC adaptor (sold separately), the power save function will become active after
about 30 minutes of inactivity. Also, when using battery power and connecting the digital
camera to a personal computer, the power save function will become active after about five
minutes of no use.
œ By connecting your digital camera to a computer, you can set the time that needs to elapse
before the power save function activates. For more details, refer to the instruction manual
supplied with the SANYO Software Pack.
PLAY CAMERA
MONITOR OFF
PLAY CAMERA
MONITOR OFF
Main switch
Main switch
Shutter release button
Main switch
Lens cover
SX114/EX, /E, /U (VPC-SX560EX, VPC-SX560E, VPC-SX560 GB) Wed. Nov., 15/2000
English 28