Filter
Top Products
49
Connections
Printing Pictures via USB (D Only)
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Printing in C
C
pictures in MPO format can not be printed via direct USB connection, although JPEG copies created when
MPO+JPEG is selected for
o 3DREC can be printed in D (pg. 85). For information on C prints, visit http://
fujifilm.com/3d/print/.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Press the a button for about a second to turn
the camera on. t USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
USB
00
OK SET
FRAME
SHEETS
PICTBRIDGE
TOTAL:
00000
1 Notes
• Print pictures from internal memory or a memory card that has been formatted in the camera.
• Default printer page size and print quality settings are used when printing via direct USB connection.