FujiFilm 16243252 Digital Camera User Manual


 
122
Specifications
System
Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control Programmed AE (with program shift), shutter-priority AE, aperture-priority AE, and manual exposure
Exposure compensation
–2 EV – +2 EV in increments of
1
/
3 EV (except B, R, M, and U)
Picture stabilization Optical stabilization (image-sensor shift)
Shutter speed (combined
mechanical and electronic
shutter)
O:
1
/
4 s–
1
/
4,000 s• H: 4 s–
1
/
1,000 s
U: 4 s–
1
/
2 s
P, S, A: 4 s–
1
/
4,000 s• M: 30 s–
1
/
4,000 s• Other modes:
1
/
4 s–
1
/
4,000 s
Continuous
I: max. 200 frames; frame rate can be selected from 11, 8, 5, and 3 fps (The frame rate varies depending on
the shooting conditions or numbers of frames in continuous shooting.)
P: 16 or 6 frames; frame rate can be selected from 11, 8, 5, and 3 fps
O: 3 frames (selected exposure, overexposure, underexposure)
X: 3 frames (PROVIA, Velvia, ASTIA)• Y: 3 frames (100%, 200%, 400%)
Focus Mode: Single AF, continuous AF, manual focus with one-press AF
Focus-area selection: Center, multi, area, tracking
Autofocus system: Contrast-detect TTL AF with AF-assist illuminator
White balance Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent lighting; custom white balance
Self-timer
Off, 2 sec., 10 sec.; auto shutter release (n and o)
Flash Manual pop-up flash; effective range when sensitivity is set to AUTO (800) is approx. 30 cm–7.1 m/1 ft.–
23.3 ft. (wide angle), 2.0 m–3.8 m/6.6 ft.–12.5 ft. (telephoto)
Flash modes Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash
with red-eye removal, off, slow sync with red-eye removal (red-eye removal on)