Filter
Top Products
64
Recording Pictures in RAW Format
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using di erent options for the settings listed below. The original image data
are una ected, allowing a single RAW image to be processed in a multitude of di erent ways.
1
Press MENU/OK during playback to display the
playback menu, then press the command dial
up or down to highlight j RAW CONVER-
SION and press MENU/OK to display the set-
tings listed in the table at right.
R These options can also be displayed by pressing
Q during playback.
2
Press the command dial
up or down to highlight a
setting and press the com-
mand dial right to select.
Press the command dial up
or down to highlight the desired option and
press MENU/OK to select and return to the set-
tings list. Repeat this step to adjust additional
settings.
3
Press the Q button to preview the JPEG copy
and press MENU/OK to save.
Setting
Setting
Description
Description
REFLECT SHOOTING
COND.
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING
Adjust exposure by –1 EV to +3 EV in incre-
ments of
/
EV (P 51).
DYNAMIC RANGE
Enhance details in highlights for natural
contrast (P 73).
FILM SIMULATION
Simulate the e ects of di erent types of lm
(P 55).
WHITE BALANCE
Adjust white balance (P 42).
WB SHIFT
Fine-tune white balance (P 42).
COLOR
Adjust color density (P 74).
SHARPNESS
Sharpen or soften outlines (P 74).
HIGHLIGHT TONE
Adjust highlights (P 74).
SHADOW TONE
Adjust shadows (P 74).
NOISE REDUCTION
Process the copy to reduce mottling (P 74).
COLOR SPACE
Choose the color space used for color repro-
duction (P 91).
CREATE
REFLECT SHOOTING COND.
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
WB SHIFT
RAW CONVERSION
CANCEL