Filter
Top Products
118
Power Supply and Batteries
ZBattery Charger BC-NH02 Specifications
Notes on Using the Battery Charger
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than Ni-MH batteries.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
Rated input 100-240 V AC, 50/60 Hz
Input capacity 100-240 V -0.08 A
Rated output 1.2 V DC, 550 mA × 2
Applicable
batteries
AA-size Ni-MH Battery × 2
Charging time Approx. 5 hours
Dimensions 70 mm × 65 mm × 23.3 mm
(2.8 in. × 2.6 in. × 0.9 in.)
(L × W × D)
Mass (Weight) Approx. 60 g (2.1 oz.)
(excluding batteries)
Operating
temperatures
0°C to + 40°C
(+ 32°F to + 104°F)