Filter
Top Products
123
Appendices
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed Explanation Remedy
(Lit red)
V (Blinking red)
The batteries are low or completely out of charge. Load new or fully charged batteries.
|
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
{
The AF (autofocus) cannot work effectively. • If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.34).
• Select Macro mode when taking close-up shots.
}
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
FOCUS ERROR
ZOOM ERROR
Camera malfunction or fault. • Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
NO CARD
Memory Card is not inserted when transferring
images.
Insert a Memory Card.
CARD NOT INITIALIZED
• The Memory Card or internal memory is not
formatted.
• The Memory Card was formatted on a PC.
• The Memory Card contact area is soiled.
• Camera fault.
• Format the Memory Card or internal memory on
the camera (➝p.90).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.90). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
Continued Q