Filter
Top Products
57
Advanced Features
3
56
2
1Press “b” to play the movie.
2The playback time appears on the LCD monitor
along with a progress bar.
●
!
Take care not to block the speaker.
●
!
When the sound is difficult to hear, adjust the volume (➡P.58).
●
!
If the subject of the shot is very bright, white vertical streaks
may appear in the image during playback. This is normal.
Bar
01
02
1
1Set the Mode switch to “w”.
2Press “d” or “c” to select the movie file.
●
!
Movies cannot be played back using multi-frame playback.
Press the “DISP/BACK” button to select single-frame
playback.
01 02
PLAYING BACK MOVIES
PLAYBACK MODE
Indicated by the “r” icon.
Movies are displayed one size smaller than still
images.
■ Playing back movies
Control Description
Playback
Playback begins.
Playback stops when the end of the movie is reached.
Pause/Resume
Pauses the movie during playback.
Press “b” again to resume playback.
Stop
Stops playback.
✽ Press “d” or “c” while playback is stopped to go back to the
previous file or advance to the next file respectively.
Fast forward/Rewind
Press “d” or “c” during playback to skip forwards or backwards
through the movie.
Skip playback
Press “d” or “c” when the movie is paused, the movie advances
or goes back one frame.
Hold down “d” or “c” to move through the frames quickly.
When paused
Rewind Fast forward
◆
Playing movie files
◆
i You may not be able to play some movie files recorded on other cameras.
i To play back movie files on a PC, save the movie file on the xD-Picture Card to the PC’s hard disk
and then play back the saved file.
1Set the Mode switch to “r”.
2Press the “p” button.
2
01 02
1Press “a” or “b” to change the setting.
2Press the “MENU/OK” button to confirm the
setting.
Quality settings in Movie mode
1
01 02
y QUALITY SETTINGS IN MOVIE MODE
p PHOTO MODE MOVIE
Quality mode
for better quality
to record longer movies
60 sec.
180 sec.
$
(320 × 240)
#
(160 × 120)
Sample uses maximum recording time
●
!
In “r” Movie mode, do not set the “S” (sensitivity) setting.
●
!
In “r” Movie mode, do not set the “J” FinePix COLOR
setting.
The quality setting is retained even when the
camera is off or the Mode is changed.