Filter
Top Products
98
Connecting Camera Directly to Printer — PictBridge Function
CHECK
To select uPRINT DPOF, the DPOF settings must be
specified on FinePix F650 beforehand (➝p.64).
CAUTION
Even when WITH DATE E is specified in the DPOF
settings (➝p.64), the date is not inserted on printers that
do not support date printing.
MEMO
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
ACheck that “PRINTING” is not displayed on the
camera’s LCD monitor.
BTurn the camera off. Unplug the USB cable (included).
MEMO
DPOF setting can be specified for images on internal
memory.
CAUTION
• In PictBridge function, images photographed on other
than a camera may not be printed.
• Do not connect to a PC when the USB MODE setting
is set to <PICTBRIDGE. See p.130 if you connect
to a PC by mistake.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or an xD-Picture Card that was
formatted on FinePix F650.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
F650 may not be printed.
CANCEL
CANCEL
1
/
9SHEETS
SHEETS
PRINTING
PRINTING