Filter
Top Products
120
Notes on Media - continued
• Do not carry SmartMedia in locations such as a trouser pocket. This could subject the
SmartMedia to excessive force when you sit down, thereby damaging the SmartMedia.
• The SmartMedia may feel warm when it is removed from the camera after being used for
an extended period. This is normal and does not indicate a fault.
• SmartMedia cards have a limited life. After a long period of use it will become impossible to
record new image data on the card. In this event, purchase a new card.
• Stick the enclosed index label onto the index area on the SmartMedia. Do not use third-
party labels on the SmartMedia as this can cause faults when the SmartMedia is inserted
or removed.
• Take care that index labels do not overlap into the write-protect area.
• If there is any initial product defect in SmartMedia as a result of manufacturing by
FUJIFILM, the same number of replacement cards will be provided free of charge.
FUJIFILM accepts no liability for faults attributable to other causes.
■ Notes on using Microdrive and CompactFlash
• Do not write on the media label.
• Do not peel off the media label.
• Do not stick another label onto a media.
• When carrying or storing a media, keep it in the protective case provided.
• Do not use media in CF Type II slots that do not have an eject function.
• Take care when handling media that have been used for long periods as they may become
hot.
• Do not place media close to strong magnets.
• Keep media dry.
• Do not apply excessive force to the media cover.
■ Notes on using media with a personal computer
• If you intend to take photos using a media that has been used on a personal computer, first
format the media on your camera.
• When you format a media in the camera and then photograph and record images, a folder
is automatically created on the media. Image data is then recorded in this folder.
• Do not change or delete the folder names or file names on the media from your PC as this
will make it impossible to use the media in your camera.
• Always use the camera to erase image data on a media.
• To edit image data, copy the image data to the computer’s hard disk and then edit the
copied data.
■ SmartMedia Specifications
Type Image memory card for digital cameras (SmartMedia)
Operating voltage 3.3 V
Operating conditions Temperature: 0°C to +40°C (+32°F to +104°F)
Humidity: 80% or less (no condensation)
Dimensions 37 × 45 × 0.76 mm (1.45 × 1.77 × 0.03 in.) (W × H × D)