Filter
Top Products
81
3
Shooting and Recording Previews
1
Take a picture in the normal way.
2
To record the image displayed on the preview screen,
press function button [1] or press the “MENU/EXE”
button.
If you do not take this step, the image is not recorded.
If you do not want to record the image, press function
button [2] or press the “CANCEL” button, or press the
shutter button halfway (the image is cleared from the
preview screen).
Preview Setup
In order to display a preview image and then record or erase the image, you
must first set the “PREVIEW” setting to “MANUAL REC”, as described in
“Preview” (☞P.49) in Setup. This function will not work if any other setting is
selected. Also, to record the image in this mode, you must take the steps
described below after taking the shot.
☞
Note
■ This section describes how to display a preview image of the shot you
have taken on the color LCD monitor and then record that image.