FujiFilm FinePix S1 Digital Camera User Manual


 
127
5
Item Specifications
Display
I/O sockets
Main Functions
Information display
Color LCD monitor
Video out
Digital (USB)
DC input
Auto Power Off
Battery check
White balance
Playback
Erase modes
Image quality settings
Other
Dimensions
Mass (Weight)
Power
supply
Number of shots using
batteries*2
Operating conditions
Viewfinder display
Top display panel
Rear display panel (backlit)
2-inch 200,000-pixel low-temperature polysilicon TFT
mini pin jack (3.5-mm dia.) (NTSC/PAL)
Data downloading to PC and taking pictures your PC
Used to connect AC Power Adapter AC-5VH
Off, 2 min. or 5 min. (disabled during auto playback and when the
camera operates connected to a PC)
• Battery checking performed on camera and at image processor
respectively. However, checking is performed on the camera
when the battery adapter is used.
• Check levels: 3 levels (full, flat and low)
If the battery capacity is insufficient in either the image processor
or camera, a warning is displayed for 3 seconds and then the
Auto Power Off function is triggered.
AUTO, Sunny, Shade, Fluorescent 1, Fluorescent2, Fluorescent3,
Incandescent and Custom
Single-frame, 4-frame, 9-frame, Playback zoom, Histogram and
Auto-play
Format, All frames, Single frame
Color, Tone, Sharpness
DPOF, Multi-exposure, Frame no. memory, Custom WB setting,
Standard chart
1
48.5
×
125
×
79.5 mm (5.8
×
4.9
×
3.1in.) (excluding LCD screen
and attachments)
800 g (28.2oz.) (body only, not including batteries)
4 AA-size batteries (alkaline (provided),
Ni-MH (sold separately) or Ni-Cd (sold separately))
Special AC Power Adapter AC-5VH (sold separately)
CR2025 lithium button cell battery (supplied, for clock and settings
backup)
2 CR123A lithium batteries (provided)
Power also available from image processor using battery adapter.
However, the built-in flash cannot be used when the battery
adapter is used.
Approx. 650 (without previews, recorded on SmartMedia, built-in
flash off)
(with Ni-MH batteries (HR-3UF) used in image processor and
CR123A lithium batteries used in camera)
Temperature: 0°C to +40°C. (+32°F to +104°F) (Note that the
range for Microdrive is +5°C to +40°C (+41°F to +104°F).)
Humidity: 80% or less (no condensation)
See P.9.
General
Image
processor
Camera
Accessories
*2 This is a guide to the number of consecutive shots that can be taken at normal temperatures. Actual numbers
may vary depending on the camera’s operating conditions and the amount of charge in the batteries.