Filter
Top Products
106
Connecting to a PC
CAUTION
When displaying “CHECKING USB”
If “CHECKING USB” appears and then
[COMMUNICATION ERROR] is displayed on the LCD
monitor, @ DSC is not selected in USB MODE.
Disconnect the USB cable (included) to the camera and
restart the procedure from step C.
CAUTION
• Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately). If the camera suddenly loses power
during data exchange, the xD-Picture Card or internal
memory could be damaged.
• Do not disconnect the USB cable (included) when the
camera is communicating with a PC. If disconnecting
the USB cable (included) during communication, the
files on the xD-Picture Card or internal memory may
cause damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (included) is connected
correctly and pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.108).
• When the camera and PC are exchanging data, the
self-timer lamp blinks and the indicator lamp blinks
alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the xD-Picture Card, always
disconnect the camera from the PC. See p.108 for
information on the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (included), always check
that the indicator lamp is off.
GConnect the camera to your PC using the USB cable
(included).
HPress w for about 1 second to turn the
camera on in Playback mode.
D
IS
P
/B
A
C
K
W
T
T
AC-5VX
(sold separately)
;
USB socket