Filter
Top Products
24
T Using the Flash
Use the ash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a ash mode, press the selector right (T). The ash mode
changes each time the selector is pressed; in modes other than AUTO,
the current mode is indicated by an icon in the monitor. Choose from the
following options (some options are not available in all shooting modes;
see pg. 91):
Mode
Mode
Description
Description
AUTO (no icon) The ash res when required. Recommended in most situations.
T ( ll ash)
The ash res whenever a picture is taken. Use for backlit subjects or for natural coloration
when shooting in bright light.
X ( ash o )
The ash does not re even when the subject is poorly lit. g will appear in the monitor at slow
shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
U (slow sync)
Capture both the main subject and the background when shooting at night (note that brightly
lit scenes may be overexposed). If I is selected for A SHOOTING MODE, shutter speed may
be as slow as 4 s. Use a tripod.
If the ash will re, c will be displayed in the monitor when the shutter button is pressed halfway.
3 Caution
The ash may re several times with each shot. Do not move the camera until shooting is complete.