FujiFilm JV100 Series Digital Camera User Manual


 
89
Troubleshooting
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
Warning
Description
Description
Solution
Solution
O (red) The battery is low.
Insert a fresh or fully-charged spare battery.
N (blinks red) The battery is exhausted.
0
Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.
R
(displayed in red
with red focus frame)
The camera can not focus.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 27).
• If the subject is poorly lit, try focusing at a distance of
about 2 m (6.6 ft.).
• Use macro mode to focus when taking close-ups.
Aperture or shutter
speed shown in red
The subject is too bright or too dark. The
picture will be over- or under-exposed.
If the subject is dark, use the flash.
BLINK DETECTED A subject or subjects may have blinked. Retake the photograph if desired.
FOCUS ERROR
TURN OFF THE CAMERA
AND TURN ON AGAIN
Camera malfunction.
Turn the camera off and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer.
The lens barrel is touched.
NO CARD
No memory card inserted when P COPY is
selected in the playback menu.
Insert a memory card.
CARD NOT INITIALIZED
The memory card or internal memory is not
formatted or the memory card was formatted
in a computer or other device.
Format the memory card or internal memory using
the m FORMAT option in the camera setup menu
(pg. 75).
The memory card contacts require cleaning.
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg. 75).
If the message persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer.
PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 8).
BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 75).