Filter
Top Products
55
Connections
Viewing Pictures on a Computer
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number
is printed at the top of the CD label for reference when updating the software or contacting
customer support.
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select
Preferences… from the Image Capture application menu. The Image Capture preferences dialog
will be displayed. Choose Other… in the When a camera is connected, open menu, then
select FPVBridge in the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start
Image Capture. The camera will be listed under DEVICES; select the camera and choose
FPVBridge from the Connecting this camera opens menu and click Open. Quit Image
Capture.
Installation is now complete. Proceed to “Connecting the Camera” on page 56.