Filter
Top Products
77
Menus
The Setup Menu
g
LCD BRIGHTNESS
Press the selector up or down
to choose display brightness
and press MENU/OK to select.
0
SET
CANCEL
LCD BRIGHTNESS
a
LCD MODE
If ON is selected, the monitor will dim to save
power if no operations are performed for
several seconds. Full brightness can be restored
by pressing the shutter button halfway. The
monitor does not dim in movie mode or during
playback.
o
AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
turned off manually. Note that regardless of the
option selected, the camera will not turn off
automatically when connected to a printer (pg.
47) or computer (pg. 52) or when a slide show is
in progress (pg. 64).
B Tip: Reactivating the Camera
To reactivate the camera after it has turned off
automatically, use the n button or press the D
button for about a second (pg. 11).
A Note
Although OFF is selected for o AUTO POWER OFF,
the camera will turn off automatically if no operations
are performed for five minutes in the following case:
• STANDBY is displayed in A.
• B is displayed in the shooting mode.