FujiFilm XT174.5BRM-K14 Camera Lens User Manual


 
– 15 –
RM-K1
MAINTENANCE
CLEANING THE LENS
Prepare lens cleaning liquid and lens cleaning paper on the market.
a. First use a so brush or blower brush to brush dust o the surface of the lens.
b. Fold the cleaning paper to an adequate size, and dip a part of it into the liquid. Lightly wipe the lens from the center
to the periphery while drawing a spiral with the wet paper part. Repeat this operation using new paper until the
lens is thoroughly cleaned.
REMOVING THE MOISTURE
When the lens main body is wet, rst wipe the water on the external part with dry cloth immediately. en put it
together with desiccant into a vinyl bag for sealing to remove the moisture inside.
STORAGE
If it is assumed that the lens will not be used for a long term, store it in a place where high temperature, much moisture
or corrosive gas is absent.
CAUTION
is lens is composed of the optical unit and drive unit.
Never remove the screws that fasten these two units. If the units are separated, it will be required to readjust
mechanism in the drive unit.
INSPECTION
If an abnormality occurs on the lens, contact our sales agent or Fujinon service department.
To maintain the high performance for a long term for use, we recommend that a periodic inspection is conducted at
least once a year.
Note that we may not be able to inspect and repair our products which have been remodeled on the user’s end.