36
SELECTING THE REMOTE CONTROLLER MODE
6
Point the remote controller toward
the camera’s remote controller
sensor, and then press the remote
controller’s shutter release button.
☞
After the remote controller lamp blinks for
about 2 seconds, the shutter is released.
The coverage of the remote controller
is up to about 5m (16.4ft.) when used
directly in front of the camera, and up
to about 3.5m (11.5ft.) when used at a
vertical or horizontal angle of 20°.
5
Aim the AF frame at your subject
and compose the picture.
05
3.5m (11.5ft.)
3.5m (11.5ft.)
20
20
5m (16.4ft.)
06
/A tripod is useful when taking pictures by remote controller.
/The remote controller may not work well when direct sunlight enters the camera’s
light sensor from behind your subject. Use the q mode (➜p.32) in this case.