GE E1486TW/G Digital Camera User Manual


 
2 32 3
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the recommended immediate
action indicated below:
If liquid crystal comes in contact with your skin, wipe the
area with a cloth , then wash thoroughly with soap and
running water.
If liquid crystal gets into your eye, ush the aected eye
with clean water for at least 15 minutes and then seek
medical assistance.
If liquid crystal is swallowed, ush your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting. Seek medical assistance immediately.
LCD Screen Information
The LCD touch-screen (touch panel) can be used to operate
the camera.
When you turn the camera on, various icons are shown on the
LCD screen to indicate the current camera settings and status.
To learn more about the displayed icons, see LCD Screen
Display on page 18.
LCD Screen notes:
Extremely high-precision technology has been used to
manufacture the LCD screen so that most of the pixels are op-
erational for use. However, there may be some minute points
(black, white, red, blue or green) that constantly appear on
the LCD screen. These points are normal in the manufacturing
process and recording and normal camera operation is not
aected in any way.
Avoid exposing the LCD screen to water; please remove
any moisture on the LCD screen with dry and soft
cleaning cloth.