Filter
Top Products
8
c. Press the “UP” button until the desired hour is displayed.
d. Press the “SET” button then the “UP” button until the correct minute is displayed.
e. Press the “SET” button to exit the alarm setting mode.
f. Press the “UP” button to enable or disable the alarm. When the alarm is active a Bell
is displayed.
g. The alarm will sound for one (1) minute every day when the alarm time arrives.
Pressing any key will shut the alarm off.
4. To use the Daylight Saving Feature, press and hold the ZONE/DST until the Sun symbol
appears. Press and hold ZONE/DST again to remove the DST feature.
5. For normal operation,
a. Press the “ZONE/DST” button until the desired time zone is displayed on the map.
b. Press and hold the “SET” button until the clock beeps to adjust the 12 or 24 hour
display format using the “UP” button. Press the “SET” button again to exit the set
mode and return to the normal time mode.
c. Press the “UP” button (while in normal time mode) to change the Celsius or
Fahrenheit format for the temperature.
d. Press the “MODE” button to choose whether the normal time or the alarm time
display is on the clock.
CLOCK TROUBLESHOOTING:
Symptom or Problem : Cause and / or Solution :
Clock will not set 1. Position the clock to face Colorado
2. Set manually
Display is Dim 1. Replace battery
Time is wrong 1. Reset the Time zone
2. Manually set the clock
3. Use the DST feature