Geneva Lab 3205 Camcorder User Manual


 
GENEVA
-
HOT BEVERAGE MERCHANDISER • 3205 • 3206 • 4214803
19
Figure 13e - Remove the filter carriage by
sliding it towards you.
Figure 13e
Figure 13f - Unclip/Detach the Sealing Rod
Connector by pulling towards you.
Important:
When re-assembling do not forget to
reconnect the Sealing Rod
Figure 13f
Figure 13g - Holding the Brewing Chamber
as shown pull it gently towards you to
remove it
Figure 13g
Figure 13h - Lift off he Steam Extractor
Hood
Important:
When replacing the Steam Extractor Hood
ensure it is located behind the release catch
and that it is sat-down properly as shown.
Figure 13h
Use de-staining product to clean the Brewer, cylinder, steam trap and carriage assembly. Then
rinse all parts thoroughly with clean water.