GENEVA
-
HOT BEVERAGE MERCHANDISER • 3205 • 3206 • 4214803
21
REFITTING THE COFFEEE BREWER
• Open the door of the machine and switch machine off using the main switch.
• Fit the Steam Extractor Hood (Fig 13h) back onto the brewer chamber, and refit the unit to the
machine.
• Re-attach the sealing rod (Fig 13f).
• Refit the carriage assembly (Fig 13e).
• Use the locking catches (Fig’s 13c & 13d) to lock the carriage in place
• Refit the splashguard (Fig 13b).
• Refit the outlet elbow (Fig 13a).
• Re-align the ingredient chutes into the brewer chamber.
• Ensure that hands and loose clothing are clear of the brewer(s).
• Switch machine back ON.
• Close and lock the machine.
• Once machine has reset, make a test of at least one coffee.