Filter
Top Products
20
GENEVA
-
HOT BEVERAGE MERCHANDISER • 3205 • 3206 • 4214803
FILTER BELT REMOVAL & REPLACEMENT
•
Figure 14a - First note the Tension
Locking Bar in the ‘tensioned’ position
Figure 14a
•
Figure 14b - Hold the carriage in your
hand as shown, using your fingers release
the tension on the filter belt by pulling back
the tension arm in the direction indicated
by the arrow, hold whilst moving to the
next step
Figure 14b
•
Figure 14c - Push the Red release handle
forward and rotate in the direction of the
BIG arrow, when the spindle is in the
upright position as shown by the small
arrow, pull the red handle back to lock in
the ‘relaxed’ position
Figure 14c
•
Figure 14d - The filter belt can now be
removed as shown
IMPORTANT:
I. The Coffee Filter Belt can be
identified by its BLUE colored
stitching thread (part #
4215265.001).
II. When fitting the new belt, ensure
the belt is passed under the
scraper plate indicated by the
arrow
Figure 14d