Filter
Top Products
EN-29
MENU OPTIONS
Capture Menu
This menu is for the basic settings to be used when capturing photos.
1. Press the ON/OFF button to turn the power on.
2. Press the SET button, and set the camera mode to any scene mode.
3. Press the MENU button to enter the [Capture] menu.
4. Select the desired option item with the up or down side of the 4-way navigation
control, and press the SET button to enter its respective menu.
The selectable items may vary in different capture modes.
5. Select the desired setting with the left or right side of the 4-way navigation control,
and press the SET button.
6. To exit from the menu, press the MENU button.
Size
This sets the size of the photo that will be captured.
* 16M / 12M / 8M / 2M / VGA / 16:9
ISO
This sets the sensitivity for capturing photos. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the photo will appear.
* Auto / ISO100 / ISO 200 / ISO 400 / ISO 800 / ISO 1600 / ISO 3200
Quality
This sets the quality (compression) at which the photo is captured.
* Fine / Standard / Economy
W. Balance
This sets the white balance for a variety of lighting conditions and permits photos to be
captured that approach the conditions that are seen by the human eye.
*Auto / Incand. / Fluoresc.1 / Fluoresc.2 / Daylight / Cloudy / Manual WB
Sharpness
This sets the sharpness of the photo that will be captured.
* Hard / Standard / Soft
MENU SET
;;
MP
2
AUTO
MENU SET
;;