HP (Hewlett-Packard) HPS520 Digital Camera User Manual


 
EN-30
Color
This sets the color of the photo that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Saturation
This sets the saturation of the photo that will be captured.
* High / Standard / Low
Metering
This sets the metering method for calculating the exposure.
Capture Md.
This sets the recording method at the time of capturing photos.
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* Center: Averages the light metered from the entire frame, but gives greater
weight to the subject matter at the center.
* Spot: A very small portion of the center of the screen is measured to
calculate the correct exposure.
* Average: The exposure is measured all of the subject area.
* Single: Captures one photo at a time.
* Continuous: Permits continuous capture of up to 3 photos.
* AEB: Permits 3 consecutive photos in the order of standard exposure,
underexposure and overexposure compensation.
* Album Shot: Creates an album-like layout to combine 3 shots into a single
image.
* Burst: Permits continuous photography while pressing and holding the
shutter button. As long as you hold the shutter button pressed,
images are captured until the memory capacity is exhausted.
* Cont.flash: Permits continuous capture of up to 3 photos with flash.
* Pre-shot:
Select a background by 1st shot, the image shown on display will
be transparent, then take the 2nd shot on the basis of 1st image.
Image of 1st shot is only a guiding tool, it won't be saved on SD
card. Normally this function is used when taking a portrait picture
and the background is selected by the model instead of the
photographer.
* Coupl.shot: Uses separate areas to combine two shots. You can include
yourself in the photo.
* Burst 30fps: Permits continuous capture of up to 30 photos in the resolution
640 x480 within 1 second.
* Interval capture: Captures continuous photos at a preselected time interval.