Filter
Top Products
4
Facility names and functions
1 CCU POWER switch
CCU power on/off switch.
2
CCU POWER LED
Lights when power is on.
3
CABLE CHECK LED
OK: CAMERA POWER switch 4
can be
operated.
OPEN: Fiber cable not connected.
SHORT: Excess current in fiber cable.
Note: CAMERA POWER switch 4
is
inoperative when OPEN, SHORT LED is
lighted.
4 CAMERA POWER switch
Camera power on/off switch; lights at power on.
When the camera power is off, only one channel
intercom (CH1) is available.
Press the switch for 3 sec. or more, the camera power
turns off.
5
GL ON LED
Lights during genlock operation.
Note: When a different frame rate signal is input for
genlock, the LED blinks and the signal is
ignored.
6
R TALLY LED
Lights at red tally input or when sending CALL
signal from camera.
7
G TALLY LED
Lights at green tally input.
8
CALL button
Press to call the camera.
9
INTERCOM LEVEL control
Adjusts intercom listening volume.
10
TALK ON/OFF switch
Intercom microphone on/off switch.
11
PRIVATE/COMM switch
PRIVATE: Communicate with camera only
COMM:
Communicate with entire system
12
Intercom connector (XLR,5P)
Connection for optional MT-12MF headset.
8
6
7
4
2
3
5
1
10
11
12
9
27