Filter
Top Products
11
Function menu
RETURN SELECT menu
ASSIGNMENT menu
MIC GAIN menu
■ＲＥＴＵＲＮ ＳＥＬＥＣＴ
ＲＥＴ．ＣＨ ＳＥＬＥＣＴ
ＣＨ１ ：Ｄ．ＲＥＴ１
ＣＨ２ ：Ｄ．ＲＥＴ２
ＣＨ３ ：Ａ．ＲＥＴ１
ＣＨ４ ：Ａ．ＲＥＴ２
ＡＳＳＩＧＮＭＥＮＴ ：
■ＡＳＳＩＧＮＭＥＮＴ
ＳＥＬＥＣＴ ＴＹＰＥ
Ｄ．ＲＥＴ１ ：ＨＤ ＳＤＩ
Ｄ．ＲＥＴ２ ：ＳＤ ＳＤＩ１６：９
Ｄ．ＲＥＴ３ ：ＳＤ ＳＤＩ ４：３
Ｄ．ＲＥＴ４ ：ＳＤ ＳＤＩ
Ａ．ＲＥＴ１ ：ＳＤ ＶＢＳ１６：９
Ａ．ＲＥＴ２ ：ＳＤ ＶＢＳ ４：３
Item Setting Factory setting Description
D.RET1 HD SDI
The transmission signal set to digital return 1 is selected.
D.RET2 HD SDI
The transmission signal set to digital return 2 is selected.
D.RET3 SD SDI 16:9
The transmission signal set to digital return 3 is selected.
D.RET4
HD SDI,
SD SDI16:9,
SD SDI 4:3,
SD SDI 4:3
The transmission signal set to digital return 4 is selected.
A.RET1 SD VBS16:9
The transmission signal set to analog return 1 is selected.
A.RET2
SD VBS16:9,
SD VBS 4:3
SD VBS 4:3
The transmission signal set to analog return 2 is selected.
Item Setting Factory setting Description
MIC1 GAIN -10dB, -20dB, -30dB,
-40dB, -50dB, -60dB, -70dB
-60dB Sets the sensitivity of the MIC1 line.
MIC2 GAIN -10dB, -20dB, -30dB,
-40dB, -50dB, -60dB, -70dB
-60dB Sets the sensitivity of the MIC2 line.
Control the MIC GAIN when it controls remotely the camera.
Not control the MIC GAIN when display the “*” sign.
Display the “*” sign when it doesn’t control remotely the camera.
Item Setting Factory setting Description
CH1 D.RET1
Selects the RET signal when the RET1 transmission signal
switch of the CA-HF1000 is set to 1.
CH2 D.RET1
Selects the RET signal when the RET2 transmission signal
switch of the CA-HF1000 is set to 2.
CH3 D.RET1
Selects the RET signal when the RET3 transmission signal
switch of the CA-HF1000 is set to 3.
CH4
D,RET1,
D,RET2,
D,RET3,
D,RET4,
A,RET1,
A,RET2
D.RET1
Selects the RET signal when the RET4 transmission signal
switch of the CA-HF1000 is set to 4.
ASSIGNMENT -
Used to display the ASSIGNMENT submenu.
■ＭＩＣ ＧＡＩＮ
ＭＩＣ１ ：－６０ｄＢ
ＭＩＣ２ ：－６０ｄＢ