Filter
Top Products
12
Function menu
SYSTEM TIMING menu
PIX DISPLAY menu
SD-DTL menu
■ＳＤ ＤＴＬ
ＳＤ ＤＴＬ ：ＯＮ
Ｈ ＧＡＩＮ ： ０
Ｖ ＧＡＩＮ ： ０
Ｈ ＣＲＩＳＰ ：－１２８
Ｖ ＣＲＩＳＰ ：－１２８
ＤＴＬ ＦＲＥＱ ：５ＭＨｚ
ＬＥＶＥＬ ＤＥＰ ：－１２８
ＬＥＬ ＤＥＰ ＳＬＰ：－１２８
Item Setting Factory setting Description
SD DTL OFF,ON ON Enable the DTL function of SDTV.
H GAIN -128 to +127 0 Adjust the SDTV Horizontal DTL level.
V GAIN -128 to +127 0 Adjust the SDTV Vertical DTL level.
H CRISP -128 to +127 -128 Set the operation threshold level of horizontal DTL in
order to prevent to emphasize noise.
V CRISP -128 to +127 -128
Set the operation threshold level of vertical DTL in
order to prevent to emphasize noise.
DTL FREQ 4MHz,5MHz,6MHz,
7MHz,8MHz
5MHz Set the Horizontal DTL boost frequency.
LEVEL DEP -128 to +127 -128 Dark component DTL level adjustment slice.
LEV DEP SLP -128 to +127 -128 Dark component DTL level adjust slope.
■ＳＹＳＴＥＭ ＴＩＭＩＮＧ
ＨＤ Ｈ ＰＨＡＳＥ ： ０（ ０）
ＳＤ ＳＤＩ Ｈ Ｐ ： ０（ ０）
ＳＤ ＳＤＩ Ｈ Ｐ ：１０８（ １７２８）
ＳＣ ＣＯＡＲＳＥ ： ０°
ＳＣ ＦＩＮＥ ： ０（ ０）
ＳＤ Ｙ ＬＥＶＥＬ ： ０
Ｃ ＬＥＶＥＬ ： ０
Item Setting Factory setting Description
HD H PHASE -128(-512 )to +127(511) 0 Adjust HD-SDI output phase to VBS.
SD SDI H P -128(-256 )to +127(255) 0 Adjust SD-SDI output phase to VBS
SD VBS H P -128(-2048 )to +127(2047) 108( 1728) Adjust VBS output phase to genlock signal.
SC CORSE 0
°
,90
°
,180,
°
270
°
0 Adjust quarter phase of VBS subcarrier to
genlock (black burst) signal.
SC FINE -128(-512 )to +127(511) 0 Adjust fine phase of VBS subcarrier to genlock
(black burst) signal.
SD Y LEVEL -128 to +127 0 Adjust the VBS luminance level.
SD C LEVEL -128 to +127 0 Adjust the VBS chrominance level.
■ＰＩＸ ＤＩＳＰＬＹ
ＦＩＬＴＥＲ ：ＯＮ
ＥＣＣ ：ＯＮ
ＩＲＩＳ ：ＯＮ
Item Setting Factory setting Description
FILTER OFF, ON
ON/OFF
ON Sets the types of the PIX OUT optical filter display and
ECC filter display.
For details, see the filter display below.
ECC OFF,ON ON Display the Electric Color Correction filter.
IRIS OFF, ON ON Display the F-value of the lens iris.