Filter
Top Products
13
Function menu
SD-SETTING menu
ECC filter indication
When the FILTER setting is ON, the ECC filter is displayed at the lower center of the screen. The display depends on the optical
filter position.
ECC_FILTER
A.3200K
B.4300K
C.5600K
D.6300K
E.8000K
Displays ECC filter information with
optical filter 1.
PIX OUT camera status display
１．３２００Ｋ Ａ．３２００Ｋ Ｆ８．０
Optical filter
ECC filter
Lens iris
■ＳＤ ＳＥＴＴＩＮＧ
ＯＵＴＰＵＴ ：ＲＧＢ
ＣＯＭＢ ＦＩＬＴＥＲ：ＯＦＦ
ＡＳＰＥＣＴ ：１６：９
ＷＦＭ ：ＥＮＣ
ＣＯＭＰ ＳＥＴＵＰ ：ＯＦＦ
Ｒ－Ｙ／Ｂ－Ｙ ＬＥＶ：１００%
Item Setting Factory setting Description
OUTPUT RGB, COMP RGB Set output signals from the COMPONENT/RGB
connector.
RGB
: Outputs the R, G, and B signals.
COMP
: Outputs the Y, Pb, and Pr signals.
COMB FILTER OFF, ON OFF Turns on/off a comb filter.
ASPECT 16:9,4:3 16:9 Select the SD aspect ratio.
WFM R, G, B, ENC, SUP, SEQ ENC Set the WFM output (Analog Video output) and WFM
CONTROL (Control Signal output).
SD-SDI, the HD-SDI output, and WFM CONTROL
are connected with a SDI Waveform monitor,
the control synchronizes with the Waveform monitor.
*Please see 19 page "Service information - WFM
CONTROL" in detail.
COMP SETUP OFF, ON ON(NTSC)
OFF(PAL)
Turns on/off the setup of an analog component Y
signal.
R-Y/B-Y LEV 100%, 75% 100%(NTSC)
75%(PAL)
Set the 100%/75% of the analog component
R-Y/B-Y signal.