Filter
Top Products
English
99
13
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose “Self
Timer” on the “Record
Functions Setup” menu
screen, and then press
the A button.
2 Select “On”, and then press the A button.
The self-timer will be set.
3 Press the MENU button to end the setting.
4 Press the PHOTO button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO button again
before recording starts, or press the C button.
The self-timer function is valid only when recording photos (stills).
Se l f Timer
On
Off
OSD Output
Input Source
ENTER RETURN
Record Functions Setup
RA
M
RA
M
10
999
REM
8:00AM
9/30/2006
Self-timer recording