Filter
Top Products
Name and function each section
MENU button
Press this button to display the
camera setup menu. The switches U,
D, L and R provide different
functions depending on whether the
menu is displayed (MENU mode) or
not (DERECT mode).
U button
DERECT mode:
While holding down this
button for more than two
seconds and press the D
button carries out auto
shading compensation (ASC
ASC
).
MENU MODE:
Pressin
g
this button moves
LENS connctor
Lens iris control signal
connector; connect the iris
MULTI connector
Output for RGB, Y/R-Y/B-Y, o
r
Y/C and VBS signals.
Also used for sync signal I/O an
d
external trigger signal input.
DC IN connector
The 12V power supply is
connected.
REMOTE connector
Used for connection with the
remote control box RC-Z3 o
r
personal computer
.
Pilot lamp
Lights when power is
supplied.
VIDEO conector
Outputs a composite video
signal(1Vp-75 hms).
䌎䌕
䌅䌒
䌍䌕䌌䌔䌉
䌌䌅
䌁䌗䌂
䌆䌉䌌䌅
䋫
䋭
䌁
䌂
䌃
㪬
䌎䌓
䌂䌁䌒
㪛
㪩
㪣
㪘㪪㪚
䌖䌉䌄䌅䌏
䌍䌅
䌐䌏䌗
䌒䌅䌍䌏䌔䌅
䌄䌃䇭䌉䌎
BAR/D button
DERECT mode:
Press this button to turn
on/off a color bar signal.
MENU mode:
Pressing this button moves
the cursor up.
FILE/R button
DERECT mode:
Selects the scene file. Press
once to show the present file
name for 1 second. During
the display, press again to
change the scene file.
MENU mode:
In this mode, it is allowed to
change functional data or
carry out each function.
AWB/L button
DERECT mode:
Holding down this button for more than
two seconds carries out auto white balance
(AWB).
MENU mode:
In this mode, it is allowed to change
functional data or carry out each
function.
For details of each connector, refer to the description of connectors (page 46).
5