Hitachi VM-E56A Camcorder User Manual


 
Advanced Techniques
pg. 37 - 46 -
46
8. When you complete your title, press PLAY to create a second title as required, or press the TITLE
ON/OFF button on the remote control to store the title in memory and remove the title graphics from the
viewfinder.
Note: As long as the correct current time can be displayed, the title is held in memory.
Correcting Errors
1. Press the TITLE ON/OFF button on the remote control.
2. Select the title with the PLAY button.
3. Use the STOP button to select the character to be corrected.
4. Use the F.FWD and REW/REVIEW buttons to correct the character.
5. Press the TITLE ON/OFF button on the remote control to store the corrected title in memory.
Recording Title on a Tape in the Camera/Recorder
1. Hold down the red button on the CAMERA/OFF/VIDEO switch while sliding the switch to
CAMERA.
2. Locate the point of the tape where you wish to record the title ("Using Quick Edit," p 36).
3. Press the TITLE ON/OFF button on the remote control.
4. Use the PLAY button to select the title you wish to record.
5. Press the Start/Stop button to start recording the title.
6. Press the TITLE ON/OFF button on the remote control to stop recording the title. The title
graphics disappear from the viewfinder and the camera/recorder can record normally.
Note: Create and store your title before an event you plan to record. Just press the TITLE ON/OFF
button on the remote control to superimpose the title over the scene as you record it. This method
avoids erasing previously recorded material which will happen when you record a title on a
previously recorded tape.
Note: Title recording is disabled when you connect the optional AV input cable to the AV IN/OUT
jack to record video and audio from the television or VCR.
Recording a Title while Transferring a Tape
1. Connect the camera/recorder to the VCR (p 27).
2. Press the TITLE ON/OFF button on the remote control to turn title on.
3. Use the PLAY button to select a title from memory.
4. Press the TITLE ON/OFF button on the remote control to turn title off.
5. Turn on the VCR and set it to record. Hold down the red button on the
CAMERA/OFF/VIDEO switch while sliding the switch to VIDEO. Press PLAY on the
camera/recorder.