Hitachi VM-E56A Camcorder User Manual


 
General Maintenance
pg. 51
- 55 -
55
Picture bends at the top of the TV screen. TV receiver is older type. It needs to be
modified to work properly with
camera/recorder.
Tape is damaged. Try another cassette.
Color of your TV screen is too bright, too faint
or change.
TV set has VIR circuit. Turn it off during
playback.
BATTERY CONDITION
SYMPTOM CHECK POINT & CORRECTION
The ( ) indication in the electronic viewfinder
flashes.
Try another battery or charge the batteries.
NO OPERATION IS ACCEPTED
SYMPTOM CHECK POINT & CORRECTION
Power is not turned on and no button operations
are accepted.
Remove the power source, and after about one
minute, push the reset switch gently using a
toothpick, etc. until you feel a click. The
display will be reset. Then set the information
again.
TAPE DISPLAY
SYMPTOM CHECK POINT & CORRECTION
TAPE appears in the viewfinder. Have you moved the camera/recorder from a
cold place to a warm place so that its
temperature changed abruptly? If the
temperature had changed, remove the cassette
and set CAMERA/OFF/VIDEO switch to OFF,
then wait for about one hour.
Remove the cassette and then try to reinsert,
remove it several times. If indication is still
shown in the viewfinder, use a cleaning tape to
clean the heads and replace the cassette.