Filter
Top Products
IDENTIFICATION AND OPERATION OF CONTROLS
32
IDENTIFICATION AND OPERATION OF CONTROLS
Left side Illustration
1. Lens
F1.4 (6~48mm) 8:1 power zoom lens features auto focus and auto iris functions.
2. "ZOOM MODE" Button
Use this button to switch the digital zoom feature. Usually press this button so that
"ZM:1" appears in the viewfinder. (See "DIGITAL ZOOM" on page 25.)
3. "EIS" (Electronic Image Stabilizer) Button
Press to display " " in the viewfinder. EIS corrects slight shaking of the image to be
recorded.
4. "B. (Back) LIGHT" Button
When the subject is lit from behind, press and hold this button to compensate for the
back-lighting.
5. Cassette Holder
Slide "EJECT" switch to open the cassette holder. Be aware of the cassette direction
when inserting.
NOTE: Power source must be connected to open the cassette holder.
6. "FADE" Button
During recording you can add a professional touch to your recordings by fading in and
out of scenes. You can select the three fade modes - the white fade, wipe fade and
zoom fade.
7. Focus Control
For manual focusing, rotate this control to bring the subject into focus.
8. "FOCUS" Select Button
Press this button to switch between automatic and manual focusing. If this buttons is
pressed and "FOCUS M." appears in the viewfinder, the camera/recorder enters the
manual focus mode. When "FOCUS M." is not displayed, focusing is automatic.
9. "D.FILTER (Digital Filter) Button
Press for a special-effect recording by changing the tone. If you press this button to
display " " in the viewfinder and start recording, for example, the picture will be
recorded in sepia.
10. Stereo Microphone
Sensitive to source coming from the direction in which the camera is pointed.
11. Infrared Ray Receiver
Receives infrared rays from the remote control (provided).
12. Record Indicator
This indicator lights up to indicate that the camera/recorder is recording.