Filter
Top Products
Enter the camera number under the Camera column and the display
time under Dwell. You can also set the Stack Dwell Time, which is the
length of time each group of cameras will display.
Saves your changes and returns to the Main Menu.• Exit :
Alarm Setup
< Figure 13 > Alarm Setup screen.
The Alarm Setup screen allows you to enter six alarm submenus.
Setting this to On allows users to clear alarm
events using the front panel buttons or the Pop Up menu. Setting it to
Off requires the user to enter the Setup Menus to clear alarm events.
This sets the display mode the multiplexer
will use when an alarm occurs. There are four possible settings: Full,
2x2, 2x2 Associated and Unchanged.
• Alarm Reset Button :
• Alarm Screen Format :
16