Filter
Top Products
Alarm Action Setup (1)
< Figure 15 > Alarm Action Setup (1) screen.
This screen allows you to set up the actions the multiplexer will take
when there is an alarm condition.
When set to On, the multiplexer’s internal buzzer will sound
during an alarm condition.
When set to On, the screen display will change to the
one defined in the Alarm Screen Format menu during an alarm
condition.
When set to On, the multiplexer sends the alarm
information to an external relay box via the network during an alarm
condition.
When set to On, an “A” displays on the screen when
an alarm condition occurs. It remains on the screen until it is cleared.
• Buzzer :
• Alarm Screen :
• Network Relay :
• Message Latch :
19
ENGLISH