Filter
Top Products
• OPERATION :
2nd
• OPERATION :
• OPERATION :
2nd
• OPERATION :
2nd
• OPERATION :
2nd
• OPERATION :
2nd
Press and the currently selected camera displays
full screen. Pressing another camera button will display that camera
full screen. Press and then to display a screen layout
previously defined by the user.
PIP (Picture in Picture) inserts a selected camera as a small
image in the main image.
Press and then the camera button of the camera
you want displayed in the insert.
Puts the multiplexer in 2x2 display mode or the second user-
defined display mode
Press and four cameras display on the screen.
Press and then to display the second screen layout
previously defined by the user.
Puts the multiplexer in PIP4 display mode or the third user-
defined display mode
Press and five cameras display on the screen.
Press and then to display the third screen layout previously
defined by the user.
Puts the multiplexer in 3x3 display mode or the fourth user-
defined display mode
Press and nine cameras display on the screen.
Press and then to display the fourth screen layout previously
defined by the user.
Puts the multiplexer in the Sequence Mode.
Press to start or stop all cameras sequencing
while in the 2x2, 3x3, PIP or User-defined Modes 1 to 4. Press
while in the Full-Screen Mode to start or stop a User-defined
sequence.
Press , and camera buttons 1, 2, 3 or 4 to start or stop Spot
Sequences 1 to 4 respectively.
54