Filter
Top Products
This screen allows you to associate various relays and links to the
cameras in motion alarm conditions.
There are four possible relay settings. 1 or 2: Sets either
internal relay 1 or 2 to be activated by a motion alarm. 1&2: Sets both
internal relays 1 and 2 to be activated by a motion alarm. Off: Neither
internal relay will be activated by a motion alarm.
This button links the motion detection to an alarm action.
It can be set to Off or any one of the 9 alarm actions. All alarm
actions take priority over motion actions.
This takes you to the Motion Alarm Action Setup (1)
submenu.
Saves your changes and returns to the Main Menu.
• Relay :
• Alarm Link :
• < Back :
• Exit :
Video Loss Action Setup
< Figure 20 > Video Loss Action Setup screen.
This screen allows you to set up the actions the multiplexer will take
when there is a video loss condition.
25
ENGLISH