Honeywell HD3MDIP Security Camera User Manual


 
HD3MDIP/X Network Camera Reference Guide
Document 800-04132V1 Rev A 51
01/10
Figure 4-6 IP and Firmware Settings: Device Information Tab
Compression Settings
The video signal sent from the camera to the Web-Client has a number of settings that can
be edited which affect how the video displays in the Web-Client. The Compression Settings
view enables you to configure these settings:
•Stream Type
•Resolution
•Frame Rate
•Priority (Quality or Bite Rate)
Compression Ratio (if Quality is chosen as the priority)
Target Bit Rate (if Bit Rate is chosen as the priority)
Maximum Bit Rate that the camera will provide across the network
GOP (number of frames)
Device Name as entered in the
IP Utility program
IP Address on the network
(DHCP/Static/APIPA)
Firmware Settings including
product name and version
Video Format - NTSC or PAL
Subnet Mask and Default Gateway
address that connects the camera to
the network
MAC Address is a factory assigned
address unique for each device