Filter
Top Products
33
■Contrast Control Sync Flash
Refer to page 29 for the features and conditions of use
of this sync mode.
● Refer to “Connecting the AF360FGZ with the
Extension Cord” on page 56 on using the
AF360FGZ detached from the camera.
Procedure
Turn on the power switch.
Set the sync mode switch to contrast-control
().
Set the zoom position. (The setting method
differs according to your camera and lens. Refer
to page 18.)
● If the AF360FGZ is closer to the subject than the
flash unit to be used in combination, use
(M.Zoom) to set the zoom position to a shorter
lens focal length.
Turn on the flash units to be used in combination.
● If the camera's built-in flash unit is part of the
combination, pop up the built-in flash.
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then take a
picture.
1
2
3
4
5