Filter
Top Products
45
(Using the AF360FGZ in Combination with
another AF360FGZ)
First, set the wireless mode and channel of the
AF360FGZ attached to the camera, and register
the channel on the camera.
Turn the camera off and then attach the
AF360FGZ to the hot shoe of the camera.
Set the power switch of the flash unit to
(WIRELESS).
Set the wireless mode switch to (C) or (M).
Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
Press the channel button (CH) and select a
channel from 1CH to 4CH.
Slide the setting switch back up to the (white
dot).
1
CONTROL: For using the flash unit attached
to the camera as the control flash.
MASTER: For using both flash units as main
flashes.