Filter
Top Products
8
Insignia NS-DSC10A and NS-DSC10B 10 Megapixel Digital Cameras
www.insigniaproducts.com
• PLAYBACK mode—
Using your camera
Basic operation
To turn your camera on and off:
1 Press and hold the POWER button until the
Insignia startup image opens.
2 Press Power again to turn your camera off.
The power turns off, the lens retracts (if the
camera is in Record mode), and the power
indicator LED turns off.
Taking still photos
Now that you are familiar with your camera, you are
ready to capture images and video.
To take photos:
1 Turn on the camera by pressing POWER. If your
camera is not in Record mode, press the Record
mode button until the camera icon appears in
the upper left corner of the LCD monitor.
2 Frame the shot using the focus bracket on the
LCD monitor.
3 Press the shutter button halfway. The camera
automatically adjusts the focus and exposure.
When the camera is ready to take the photo, the
focus bracket turns green, and the aperture
value, shutter speed, and ISO setting are
displayed.
4 Fully press the shutter button to capture the
image.
Setting the zoom
Your camera features 3x optical zoom and 4x digital
zoom.
To adjust the zoom:
• Press the Zoom buttons to zoom in (T) or zoom
out (W).
The zoom indicator appears on the LCD monitor.
The section of the zoom indicator on the right
side indicates that digital zoom is being used.
Using the flash
When taking pictures in difficult lighting
conditions, use the flash to get correct exposure.
This function cannot be activated for recording
video.
Note
You cannot change the LCD configuration when you
are recording or playing video clips.
32
/
32
32
/
32
10M
ISO 200
F2.8
1/60
2009/10/10 12:00
OSD on
Full OSD on
OSD off
Note
When the shake warning icon appears on the
LCD, hold the camera steady, with your arms at your
side, or use a tripod to stabilize the camera in order to
prevent blurred images.
307
10M
AUTO
F2.8
1
1
/
/
6
6
0
0100
NS-DSC10A-10B_09-0323_MAN_V2.book Page 8 Monday, April 27, 2009 8:42 AM