Filter
Top Products
71
PORT DEFINITION
Setup 1 Web port. Configure the protocol to “TCP”.
Setup 2 Video port. Configure the protocol to “TCP”.
Setup 3 SOHO Network IP Camera and Administrator Utility communication. The
protocol setting must be “UDP”.
Setup 4 SOHO Network IP Camera and Camera Viewer Utility communication. The
protocol setting must be “UDP”.
VIEWING NETWORK IP CAMERA VIA WEB BROWSER
Setup 1/Setup 2 To view the video via a Web Browser, ensure the Router/Gateway has
configured Setup 1 and Setup 2. If the web port is not default port “80”, but
changed to 8080, the remote user must enter http://203.30.212.82:8080.
VIEWING NETWORK IP CAMERA VIA CAMERA VIEWER UTILITY
Setup 2/Setup 4 To use the Camera Viewer Utility to view the Camera, please make sure the
Router/Gateway has configured Setup 2 and Setup 4.
SETUP NETWORK IP CAMERA VIA ADMINISTRATOR UTILITY
Setup 3 If you want to use Administrator Utility to configure the Network IP Camera via
the Internet, the Router/Gateway should configure Setup 3.
APPENDIX A