Filter
Top Products
CV-L105
- 3 -
5. Pin Assignment
5.1. 68-pin Digital interface connector
(Digital video, control signals, trigger input)
Fig. 2. 68-pin digital interface. (Seen from camera rear.)
Pin
number
Signal
Remarks
Pin
number
Signal
Remarks
1 GND 35 GND
2 +RD7 out 36 -RD7 out
3 +RD6 out 37 -RD6 out
4 +RD5 out 38 -RD5 out
5 +RD4 out 39 -RD4 out
6 +RD3 out 40 -RD3 out
7 +RD2 out 41 -RD2 out
8 +RD1 out 42 -RD1 out
9 +RD0 out
Red Data out. LVDS
43 -RD0 out
Red Data out. LVDS
10 BIN in
Control inp. TTL *)
44 NC
11 +GD7 out 45 -GD7 out
12 +GD6 out 46 -GD6 out
13 +GD5 out 47 -GD5 out
14 +GD4 out 48 -GD4 out
15 +GD3 out 49 -GD3 out
16 +GD2 out 50 -GD2 out
17 +GD1 out 51 -GD1 out
18 +GD0 out
Green Data out. LVDS
52 -GD0 out
Green Data out. LVDS
19 +EXT TRIG in
LVDS in
53 -EXT TRIG in
LVDS in
20 +BD7 out 54 -BD7 out
21 +BD6 out 55 -BD6 out
22 +BD5 out 56 -BD5 out
23 +BD4 out 57 -BD4 out
24 +BD3 out 58 -BD3 out
25 +BD2 out 59 -BD2 out
26 +BD1 out 60 -BD1 out
27 +BD0 out
Blue Data out. LVDS
61 -BD0 out
Blue Data out. LVDS
28 NC
62 NC
29 GND
63 GND
30 RS-232 on/off
Control inp. TTL *)
64 NC
31 PIXEL RATE in
Control inp. TTL *)
65 NC
32 +STROBE out
LVDS out
66 -STROBE out
LVDS out
33 +LEN out
LVDS out
67 -LEN out
LVDS out
34 GND
68 GND
*) The control inputs are TTL and it has 4.7 kΩ pull up to +5V.
The camera connector part number is Hirose DX10A-68S.
The connector to use on the cable side is Hirose DX31A-68P with back shell DX68-CV1